Mack Extends 6x2 Liftable Pusher Axle Benefits with Addition of Automatic Standby Option3/23/17
The 6x2 with liftable pusher axle offers improved fuel efficiency and productivity benefits and is designed for applications that haul out heavy and return empty, such as bulk haul. The addition of Automatic Standby Mode eliminates the need for the driver to manually push buttons to initiate standby mode, simplifying operation.
Mack has also added rear air disc brakes as an option to it 6X2 liftable pusher offer.
“The Mack Pinnacle 6x2 with liftable pusher axle model really helps those customers in bulk haul applications save on fuel because sensors lift or lower the axle to decrease or increase traction, providing better performance and ride,” said Roy Horton, Mack director of product strategy. “The addition of Automatic Standby Mode further simplifies things for the driver by eliminating any need for manual input in putting the truck in standby mode to prevent overload.”
When the ignition is off, Automatic Standby equalizes the suspension pressure, preventing the rear axle from being overloaded. The driver does not have to remember to initiate the standby mode and also does not need to remember the button sequence to put it in standby.
The 6x2 with liftable pusher axle monitors trailer weight and adjusts the truck’s driveline configuration to boost fuel efficiency without impacting performance. The 6x2 with liftable pusher axle is capable of determining payload by using sensors in the rear suspension and either lifting or lowering the foremost rear axle. When an empty load is detected, the axle lifts, allowing the tractor to operate as a 4x2 for less drag, better fuel efficiency and reduced tire wear, which helps lower maintenance costs. For full loads, the same axle is lowered to provide additional stability and distribution of the trailer’s weight.
To deliver optimal traction, the system’s suspension pressure and ride height are continuously monitored and adjusted to maintain a load bias toward the drive axle. In addition, three driver-selectable traction control modes are available via a dash- mounted switch:
- Enhanced Traction (ET) – Enhances low-speed traction for improved starts, docking and slippery road conditions.
- Optimized Traction (OT) – The default setting, Optimized Traction maximizes load to the drive axle. If wheel slip is detected, the system can temporarily increase load to the drive axle for 30 seconds to provide improved traction.
- Basic Traction (BT) – Lowers the lift axle regardless of suspension load and maintains a 50/50 load split between the lift axle and drive axle during loading or unloading, prolonged stops or areas that require 50/50 load splits between tandem axles.
During normal operation, control of the lift axle is automatic based on payload. The system offers a manual control feature that enables a driver to raise or lower the suspension for easier landing gear retraction or trailer hook-up respectively.
The Pinnacle model can be spec’d with the Mack MP®7, a lightweight yet powerful 11-liter engine that weighs about 400 pounds less than a typical 13-liter engine.
For more information about the 6x2 with liftable pusher axle, please visit Mack booth No. 34075 at the Mid-America Trucking Show March 23-25 at the Kentucky Exposition Center in Louisville, or contact your local Mack dealer.
Dedicated to durability, reliability and meeting the needs of customers, Mack Trucks has provided purpose-built transportation solutions for more than a century. Today, Mack is one of North America's largest producers of heavy-duty trucks, and Mack® trucks are sold and serviced through an extensive distribution network in more than 45 countries. Mack trucks, diesel engines and transmissions sold in North America are assembled in the United States. Mack manufacturing locations are certified to the internationally recognized ISO 9001 standard for quality, ISO 14001 standard for environmental management systems and OHSAS 18001 standard for health and safety management systems. Mack is also a proud sponsor of Share the Road, an American Trucking Associations' public information campaign aimed at enhancing the safety of our nation's roadways.
Mack Trucks is part of the Volvo Group, one of the world's leading manufacturers of trucks, buses, construction equipment and marine and industrial engines. The Group also provides complete solutions for financing and service. The Volvo Group, with its headquarters in Gothenburg, Sweden, employs about 95,000 people, has production facilities in 18 countries and sells its products in more than 190 markets. In 2016, the Volvo Group's net sales amounted to about $33 billion. The Volvo Group is a publicly- held company. Volvo shares are listed on Nasdaq Stockholm.
For more information about Mack, visit our website at www.macktrucks.com