The event highlighted key features of the MD Series exterior, such as sharp wheel cut for maneuverability and industry-best bumper-to-back-of-cab (BBC) measurement, as well as interior features, including a standard air-ride driver’s seat and an ergonomically designed dash. The event was designed to increase product knowledge about the new Mack MD Series, but also to allow customers to more completely understand why the MD is best suited for their needs.
“With the addition of the Mack MD Series, Mack now offers a complete lineup of Class 6 to 8 vehicles, enabling us to deliver the right truck for our customers' needs, whatever that may be” said Jonathan Randall, senior vice president of North American sales for Mack Trucks. “Customer response has been outstanding, and we look forward to delivering on our Mack commitment to offering the best solution for each customer.”
The session included important product information related to exterior and interior features and benefits, along with a Q&A session with Mack executives. The session was offered virtually and was filmed at Mack World Headquarters in Greensboro, North Carolina. Customers represented municipalities, beverage, construction, sand and gravel and fire.
The Mack MD Series will begin full production Sept. 1 at Mack’s Roanoke Valley Operations (RVO) facility in the Roanoke Valley, Virginia.
The Mack MD6, a Class 6 model, has a Gross Vehicle Weight Rating (GVWR) of 25,995 pounds, and the MD7, a Class 7 model, has a GVWR of 33,000 pounds. Both models are exempt from the 12 percent Federal Excise Tax (FET). Both the MD6 and MD7 models are available in 4x2 configurations.
These new medium-duty trucks will meet the needs of applications requiring dry van/refrigerated, stake/flatbed, dump and tank truck vocations. The MD6 model does not require a Commercial Driver’s License (CDL) to operate for non-hazardous payloads.
Page 2: Mack Highlights Features, Benefits of Mack® MD Series for Customers during Virtual Event
The Mack MD6 and MD7 models were designed with the driver in mind. Both offer comfortable and ergonomic features to ensure a quiet ride. The exterior of the medium-duty models was inspired by the Mack Anthem®, Mack’s highway model, matching its bold look and styling through the grille and hood design.
The Mack MD Series will be supported through Geotab Go offering access to Mack OneCall™ agents, available 24/7 at the Mack Uptime Center based in Greensboro, North Carolina.
The MD Series models feature a sharp wheel cut for optimal maneuverability in tough-to-navigate urban settings. The MD6 and MD7 models offer an industry-best BBC measurement of 103 inches and have a clear back of cab and top of frame rail to make it easy for body builder adaptations.
The Mack Body Builder Support Team and the Mack Body Builder Portal will support the Mack MD Series, offering customers, body builders and dealers the tools needed for a quick upfit process of truck bodies and equipment. Mack MD model information on the Body Builder Portal will be available beginning Sept. 1.
The Mack Body Builder Portal includes useful information, such as body builder manuals, wiring diagrams for electrical interfaces, Technical and Maintenance Council (TMC) recommended practices and information about diagnostic tools.
For more information about the Mack MD Series, please contact your local Mack dealer or visit www.macktrucks.com.
Page 3: Mack Highlights Features, Benefits of Mack® MD Series for Customers during Virtual Event
NOTE TO EDITORS: A high-resolution version of this photo can be viewed and downloaded at www.mackmediabank.com.
Dedicated to durability, reliability and meeting the needs of customers, Mack Trucks has provided purpose-built transportation solutions for more than a century. Today, Mack is one of North America’s largest producers of heavy-duty trucks, and Mack® trucks are sold and serviced through an extensive distribution network in more than 45 countries. Mack trucks, diesel engines and transmissions sold in North America are assembled in the United States. Mack manufacturing locations are certified to the internationally recognized ISO 9001 standard for quality, ISO 14001 standard for environmental management systems and OHSAS 18001 standard for health and safety management systems. Mack is also a proud sponsor of Share the Road, an American Trucking Associations public information campaign aimed at enhancing the safety of our nation's roadways.
Mack Trucks is part of the Volvo Group, which is driving prosperity through transport solutions by offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase customer uptime and productivity. Founded in 1927, the Volvo Group is committed to shaping the future landscape of sustainable transport and infrastructure solutions. The Volvo Group is headquartered in Gothenburg, Sweden, employs 104,000 people and serves customers in more than 190 markets. In 2019, net sales amounted to about $45.7 billion. Volvo shares are listed on Nasdaq Stockholm. For more information, please visit www.volvogroup.com.
For more information about Mack, visit our website at www.macktrucks.com